BRAKE FLUID LEVEL SENSOR INSPECTION
http://am.mazdaserviceinfo.com/emazda/dealersystem/service/esi/en_us/SM/2013/CX5/mv/books/mvw04/html/id041100801400.html[1/7/13 9:33:15 AM]
< Previous Next >
2013 - CX-5 - Brakes
BRAKE FLUID LEVEL SENSOR INSPECTION
1. Disconnect the brake fluid level sensor connector from the master cylinder.
2. Inspect for continuity according to fluid level between the brake fluid level sensor terminals.
If not as indicated in the table, replace the reserve tank. (See MASTER
CYLINDER REMOVAL/INSTALLATION
.)
< Previous Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.
To Next Page
Loading...
