DTC C0061:28/C0061:64/C0062:28/C0062:64/C0063:28/C0063:64 [DYNAMIC STABILITY CONTROL (DSC)]
http://am.mazdaserviceinfo.com/emazda/dealersystem/service/esi/en_us/SM/2013/CX5/mv/books/mvw04/html/id0402b2180800.html[1/7/13 9:29:31 AM]
4
VERIFY THAT THE SAME DTC IS NOT PRESENT
Reconnect all disconnected connectors.
Clear the DTCs from the memory.
(See
ON-BOARD DIAGNOSIS [DYNAMIC STABILITY CONTROL (DSC)].)
Start the engine and drive the vehicle at 10 km/h {6.2 mph} or more.
Are the same DTCs present?
Yes Repeat the inspection from Step 1.
If the malfunction recurs, replace the
DSC HU/CM, then go to the next
step.
(See
DSC HU/CM
REMOVAL/INSTALLATION
.)
No Go to the next step.
5
VERIFY THAT NO OTHER DTCS ARE PRESENT
Are any other DTCs output?
Yes Go to the applicable DTC inspection.
(See
ON-BOARD DIAGNOSIS
[DYNAMIC STABILITY CONTROL
(DSC)]
.)
No DTC troubleshooting completed.
< Previous Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.
To Next Page
