25
5.
If there is no problem with the VIN authentication,
touch NEXT to register the vehicle information.
If the authentication was not successful, make sure
that the VIN is correct and then enter the correct VIN.
6.
Enter the necessary information according to the instructions
on the screen.
After entering, touch SUBMIT .
7.
Touch ENROLL to register Connected Service.
If you touch DO IT LATER
, the procedure ends without
registering to Connected Service.
In this case, touch [ENROLL] from the MY VEHICLES screen at
a later time to register the service.
3-9. Using the Menus of the MyMazda APP/MY VEHICLES
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
