6363
4.
After a few moments, a screen is displayed indicating [Connected Service] as unchecked
and then the setting is completed.
Even if data communication has been stopped, Automatic 911 dialing will operate.
• If there is no check mark next to [Connected Service] on the screen in Step 2, the
onboard communication unit is disabled.
With the check box not selected, select [Connected Services] and then [OK] to
enable the data communication function of the onboard communication unit.
• If the power switch is switched OFF while the onboard communication unit is
disabled, a notification that the Connected Service is disabled will be displayed on
the center display the next time the power switch is switched ON.
When [Enable] is selected, the onboard communication unit is enabled and data
communication begins.
If you want to continue disabling data communication, select [Cancel].
If the communication function is stopped, the following functions cannot be used:
-
Malfunction Notification
-
Remote Control
-
Vehicle Status
-
Vehicle Finder
-
Send to Car
-
Online Update
-
in-car Wi-Fi
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
