m{zd{ cx-5 24
VOICE CONTROL
Voice control is activated by pushing the TALK button on the steering wheel and
speaking a command. Voice commands usually contain a verb (action word) followed by
a noun. Common verbs are “Go to” and “Play”.
USEFUL COMMANDS:
“CALL <phonebook contact name>
<mobile/home/work>”
(Example: “Call John Smith mobile”)
“DIAL <number>” (Example: “Dial 911”)
“REDIAL” – This command makes a call
to the last person you called (the top
person listed on Outgoing call history).
“CALLBACK” – This command makes a call
to the last person who called you (the top
person listed on Incoming call history).
“DRIVE HOME” /
“NAVIGATE HOME” / “TAKE ME HOME”
Any of these HOME commands sets the
destination to your home address (p. 23).
NOTE: Navigation commands are available only when Navigation map is displayed.
OTHER COMMON VOICE COMMANDS:
“HELP” - This command lets you know the available VR commands per display.
“TUTORIAL” - Mazda Connect overall introduction.
“ADDRESS” - This is a useful command for navigation address entry.
IMPORTANT:
• Make sure to say your command AFTER the beep sound.
• You can skip the system’s prompt anytime by pushing the TALK button.
• You can end your voice recognition session either by pushing the Hang-up button
on the steering wheel or by operating the commander switch.
To Next Page
Loading...
