Mazda CX-5 - Warranty Information; Repair Procedure

Bermaz Technical Service Information BR072/19
Page 4 of 10
Bermaz Motor Trading Sdn Bhd (9529-K)
No 7, Jalan Pelukis U1/46, Temasya Industrial Park, Seksyen U1, 40150 Shah Alam, Selangor Darul Ehsan, Malaysia
Tel : +60 (3) 7627 8888 Fax : +60 (3) 7627 8890
Website: www.mazda.com.my
6. WARRANTY INFORMATION
HEATER CORE FLUSHING only
Symptom Code
59 (Insufficient heating)
Damage Code
93 (Clogged)
Causal Part No.
****-61-A10
Use part number of the heater core applicable to the VIN according to EPC.
Quantity
0
Operation No.
Labor Hours
Operation No.
Labor Hours
Remark
XXRA3XRX
1.3 Hrs.
-
Period Covered
Normal Warranty Period
NOTE:
• Claim the hose clip and coolant as Related Part.
• Claim the actual expense of local purchases such as pump, hose etc. using the sublet code “Z9”
(Others). (FOR FIRST TIME REPAIR ONLY)
HEATER CORE REPLACEMENT & FLUSHING
Symptom Code
59 (Insufficient heating)
Damage Code
93 (Clogged)
Causal Part No.
**** 61 A10*
Use part number of the heater core applicable to the VIN according to EPC.
Qty.
1
Operation No. and
Hours
XXN7TXRX
Model
Without i-stop
With i-stop
MAZDA2 (DJ/DL)
4.8 Hrs.
4.9 Hrs.
MAZDA3 (BM/BN)
4.7 Hrs.
4.8 Hrs.
MAZDA3 (BP)
4.8 Hrs.
4.9 Hrs.
MAZDA6 (GJ/GL)
4.7 Hrs.
4.8 Hrs.
CX-3 (DK)
4.8 Hrs.
4.9 Hrs.
CX-5 (KE/KF)
4.8 Hrs.
4.9 Hrs.
CX-9 (TC) 2WD
6.8 Hrs.
6.8 Hrs.
CX-9 (TC) 4WD
7.3 Hrs.
7.3 Hrs.
MX-5 (ND)
4.3 Hrs.
4.4 Hrs.
Operation: Perform the diagnosis procedure, replace the heater core and
replace engine coolant twice.
Period Covered
Normal Warranty Period
NOTE:
Enter coolant, refrigerant and all replacement parts in Related Part.
7. REPAIR PROCEDURE
If you receive a customer complaint on this concern, diagnose by comparing the two temperatures of the
heater hose IN and OUT to the heater core.
If there is difference in the temperatures, flush the heater core to remove out the foreign substances using
the procedure “HEATER CORE FLUSHING PROCEDURE”.
If Circulation Pump is not available in the market, replace the heater core with a new one. In addition,
replace the deteriorated engine coolant twice using the procedure “HEATER CORE REPLACING
PROCEDURE”.
NOTE:
Since all of the deteriorated old coolant cannot be drained out by one time, do the coolant replacement
twice.