If the steering wheel is held lightly, or
depending on the road conditions, the
system may detect that you have
released the steering wheel (not holding
the steering wheel) even if you are
holding it, and display a message in the
multi-information display or the active
driving display.
•
The timing at which the lane departure
warning is activated and the steering
wheel operation assist is performed
varies.
•
The following settings for the LAS &
LDWS can be changed. Refer to Safety
Equipment on page 9-8.
•
Steering operation assist operational/
non-operational
•
Cancel sensitivity (likelihood of
steering assist)
Vehicle lane line display
When the LAS & LDWS becomes
operational while on standby, the vehicle
lane lines are displayed in the
multi-information display and the active
driving display. In the vehicle lane lines
display indicating the operation status, the
colour of the vehicle lane lines being
detected changes to white.
(Stand-by status)
Multi-information Display
Active Driving Display
(Operational status)
Multi-information Display
Active Driving Display
When Driving
i-ACTIVSENSE
4-129
CX-8_8GF4-EO-18D_Edition1 2018-3-6 19:38:07
To Next Page
Loading...
