•
The LAS&LDWS can be changed to the following settings regardless of whether the
steering operation assist has been set to operational/non-operational. Always check the
setting status when driving the vehicle and make setting changes if necessary.
Refer to Setting Change (Personalization Features) on page 9-11.
•
Steering wheel vibration: Strong/weak
•
Warning sound volume
•
Types of warnings (steering wheel vibration/beep sound/rumble sound
*1
)
*
1 A rumble strip is a series of grooves in the road pavement surface positioned at specific
intervals, and when the vehicle passes over it a vibration and rumble sound is produced
which alerts the driver that the vehicle is departing from the lane.
The rumble sound is a reproduction of the sound which occurs when a vehicle passes
over a rumble strip.
Rumble
Groove
When Driving
i-ACTIVSENSE
4-133
CX-9_8GC3-EA-17G_Edition1 2017-5-29 10:13:38
To Next Page
