Mass group Size Class Fixture
Vehicle LATCH positions
Second-row seat (Outboard)
GROUP 1
9 kg ― 18 kg (20 lb ― 40
lb)
DISO/R2 IL
CISO/R3 IL
BISO/F2 IUF
B1 ISO/F2X IUF
AISO/F3 IUF
(1) X
GROUP 2
15 kg ― 25 kg (33 lb ― 55
lb)
(1) X
GROUP 3
22 kg ― 36 kg (48 lb ― 79
lb)
(1) X
(1) For the CRS which do not carry the ISO/XX size class identification (A to G), for the applicable mass group, the
car manufacturer shall indicate the vehicle specific LATCH child-restraint system(s) recommended for each
position.
Key of letters to be inserted in the above table:
IUF = suitable for LATCH forward child-restraints systems of universal category approved for use in this mass
group.
IL = suitable for particular LATCH child-restraint systems (CRS).
These LATCH CRS are those of the “specific vehicle”, “restricted” or “semi-universal” categories.
X = LATCH position not suitable for LATCH child-restraint systems in this mass group and/or this size class.
NOTE
When installing a child-restraint system, the following points must be observed:
•
Always remove the head restraint before installing a child-restraint system. However,
when installing a backless booster seat, always install the vehicle head restraint to the
seat where the backless booster seat is installed. In addition, always use a tether strap
and attach it securely. Refer to Head Restraints on page 2-18.
•
When installing a child-restraint system to the second-row seat, adjust the front seat
position so that the front seat does not contact the child-restraint system. Refer to Seat
Operation on page 2-5.
Essential Safety Equipment
Child Restraint
2-39
CX-9_8GC3-EA-17G_Edition1 2017-5-29 10:13:38
To Next Page
