4
–
22
When Driving
Start/Stop Engine
i-stop Warning Light (Amber)/i-stop Indicator Light (Green)
To ensure safe and comfortable use of the vehicle, the i-stop function constantly monitors
the driver's operations, the vehicle's interior and exterior environment, and the operational
status of the vehicle, and uses the i-stop warning light (amber) and i-stop indicator light
(green) to inform the driver of the operation status of the i-stop system or related warnings.
i-stop warning light (amber)
When illuminated
This warning light stays on for a few seconds when the ignition is switched ON.
The warning light illuminates when the i-stop OFF switch is pressed to turn the system
off.
If any one of the following operations is performed after the engine has been
automatically stopped, the warning light illuminates. If this occurs, the engine does not
restart automatically for safety reasons, even if the clutch pedal is depressed (manual
transaxle) or the brake pedal is released (automatic transaxle). Use the standard engine
starting procedure to start the engine.
The bonnet is opened.
(SKYACTIV-D 2.2)
The driver intends to get out of the vehicle (driver's seat belt is unfastened and driver's
door is opened).
If the i-stop warning light (amber) remains illuminated even after continuously pressing
the i-stop OFF switch under conditions other than when the bonnet is opened or the driver
has exited the vehicle (driver's seat belt is unfastened and driver's door is opened), consult
an expert repairer, we recommend an Authorised Mazda Repairer.
When fl ashing
The light fl ashes if there is any malfunction in the i-stop system. Consult an expert repairer,
we recommend an Authorised Mazda Repairer.
To Next Page
Loading...
