4
–
37
When Driving
Instrument Cluster and Display
NOTE
Always set the vehicle speed according to the laws and regulations of the country/city
in which the vehicle is driven. In addition, always verify the speed of the vehicle using
the speedometer.
The vehicle speed alarm function can be set between 30 and 250 km/h (20 and 150
mph).
The vehicle speed alarm can be set using the following procedure.
1. Press the INFO switch on the speed alarm screen.
2. Select ON and press the INFO switch.
3. Set the vehicle speed by pressing the INFO up or down button, and then press the INFO
button.
LDWS Display
Displays the currently set system status.
Refer to Lane Departure Warning System (LDWS) on page 4-107 .
Warning (Display Indication)
A message is displayed to notify the user of the system operation status and malfunctions or
abnormalities.
If the warning light turns on/fl ashes simultaneously or a symbol is indicated in the display,
check the information regarding the warning light or symbol. (page 4-40 )
When only a message is displayed, refer to Message Indicated in Multi-information Display.
(page 7-45 )
To Next Page