*Some models.
9
–
14
Specifi cations
Specifi cations
Tyre and infl ation pressure
NOTE
The tyres have been optimally matched with the chassis of your vehicle.
When replacing tyres, Mazda recommends that you replace tyres of the same type
originally fi tted to your vehicle. For details, contact an expert repairer, we recommend an
Authorised Mazda Repairer.
Check the tyre pressure label for tyre size and infl ation pressure (page 6-46 ).
After adjusting the tyre pressure, initialization of the tyre pressure monitoring system is
necessary to make the system operates normally.
Refer to Tyre Pressure Monitoring System Initialization on page 4-164 .
Standard tyre
Tyre size
Infl ation pressure
Up to 3 persons —Full load
205/60R16 92V
Front 250 kPa (2.5 bar, 36 psi) 280 kPa (2.8 bar, 41 psi)
Rear 250 kPa (2.5 bar, 36 psi) 320 kPa (3.2 bar, 46 psi)
215/45R18 89W
Type A
*1
Front 240 kPa (2.4 bar, 35 psi) 280 kPa (2.8 bar, 41 psi)
Rear 230 kPa (2.3 bar, 33 psi) 300 kPa (3.0 bar, 44 psi)
Type B
*1
Front 250 kPa (2.5 bar, 36 psi) 280 kPa (2.8 bar, 41 psi)
Rear 250 kPa (2.5 bar, 36 psi) 300 kPa (3.0 bar, 44 psi)
215/45ZR18 93W
Front 240 kPa (2.4 bar, 35 psi) 280 kPa (2.8 bar, 41 psi)
Rear 230 kPa (2.3 bar, 33 psi) 300 kPa (3.0 bar, 44 psi)
1 person's weight: About 75 kg
*1 Check the tyre infl ation pressure label (driver's door frame ) for the correct tyre infl ation pressure. Refer to Tyre
Pressure Label on page 9-3 .
Temporary spare tyre
*
Tyre size Infl ation pressure
T125/70D16 96M 420 kPa (60 psi)
185/55R16 87M 320 kPa (3.2 bar, 46 psi)
To Next Page
Loading...
