Before fastening the rear seat belt, make
sure that the seat belt passes through the
seat belt guide correctly and it is not
twisted.
▼
Unfastening the Seat Belt
Depress the button on the seat belt buckle.
If the belt does not fully retract, pull it out
and check for kinks or twists. Then make
sure it remains untwisted as it retracts.
1. Button
NOTE
If a belt does not fully retract, inspect it
for kinks and twists. If it is still not
retracting properly, have it inspected at an
expert repairer, we recommend an
Authorised Mazda Repairer.
▼
Front Shoulder Belt Adjuster
The front seat belts have a front shoulder
belt adjuster. If the seat belt contacts your
neck or it slips off the shoulder, adjust the
seat belt height.
To raise
To heighten the seat belt, move the front
shoulder belt adjuster upward.
To lower
To lower the seat belt, lower it with the
knob of the front shoulder belt adjuster
pressed.
After adjusting, press the front shoulder
belt adjuster downward and make sure that
it is securely locked.
Essential Safety Equipment
Seat Belt Systems
2-27
Mazda3_8HC2-EO-19A_Edition1 2018-11-22 10:58:46
To Next Page