Due to variations in the design of
child-restraint systems, vehicle seats
and seat belts, all child-restraint systems
may not fit all seating positions. Before
purchasing a child-restraint system, it
should be tested in the specific vehicle
seating position (or positions) where it
is intended to be used. If a previously
purchased child-restraint system does
not fit, you may need to purchase a
different one that will.
Baby seat
A baby seat provides restraint by bracing
the baby's head, neck and back against the
seating surface.
Child seat
A child seat restrains a child's body using
the harness.
Booster seat
A booster seat is a child restraint
accessory designed to improve the fit of
the seat belt system around the child's
body.
1. Full booster seat
2. Backless booster seat
When using a backless booster seat,
always install the vehicle head restraint to
the seat where the backless booster seat is
installed.
(Australia)
Child-restraint systems for Australia must
conform to Australian Standard AS
1754/91 or later.
(Other countries)
Please comply with the legal regulations
concerning the use of child-restraint
systems in your country.
Essential Safety Equipment
Child Restraint
2-36
Mazda3_8HC2-EO-19A_Edition1 2018-11-22 10:58:46
To Next Page