Charge lead
The charge lead is connected to the power supply and the vehicle to send electrical
power to the vehicle. For details regarding the charge lead, refer to the instruction
manual accompanying the charge lead.
When the charge lead is not used, store the lead in the Mazda genuine storage bag.
In addition, connect the 2 hooks for the storage bag to the 2 luggage hooks located
in the luggage compartment, and tighten securely.
The component parts of the charge lead are as follows.
(Type
A
For use at charging facilities)
1. Charge connector
(Type B For home use)
1. Charge connector
2. Control box
3. Charge plug
Charge connector
(Type A)
The charge connectors are used for connecting the charging equipment to the
normal charge port.
(Type B)
The charge connector is used for connecting to the normal charge port.
Before Driving
Electric Vehicles
3-14
To Next Page
Loading...
