When the charge connector is connected to the normal charge port, a vehicle
system locks the charge connector.
When the charge connector is locked by the vehicle system, it unlocks when the
driver’s door is unlocked.
If the charge connector locked by the vehicle system is not unlocked even though
the driver’s door is unlocked, consult an expert repairer (we recommend an
Authorised Mazda Repairer).
The conditions for locking the system on the vehicle side can be changed.
For the procedure to change the conditions, refer to Charging Settings on page
3-26.
Control box (Type B)
The control box indicates the charge status by turning on/flashing the indicator light.
For the indicator light
illumination/flash
pattern, refer to the instruction manual
accompanying the charge lead.
Charge plug (Type B)
The charge plug is the part for connecting to the power supply.
Before Driving
Electric Vehicles
3-15
To Next Page
Loading...
