Mazda MX-30 2020 - Page 115

4. Open the quick charge port cap
and normal charge port cap.
1. Quick charge port cap
2. Normal charge port cap
5. Connect the charge connector of
the quick charger to the quick
charge port.
1. Quick charge port
6. Operate the quick charger to start
charging.
Make sure to lock all the doors
before leaving the vehicle while
charging.
CAUTION
When operating a quick charger,
always use the charger according to
its instructions. If the quick charger
is operated incorrectly, the quick
charger or vehicle could be
damaged.
7. When charging is finished, remove
the charge connector.
8. Close the quick charge port cap.
9. Close the charge lid.
Make sure to lock all the doors before
leaving the vehicle.
Before Driving
Electric Vehicles
3-22