▼
Instrument Panel Illumination
When the lights are turned on with the
power switch switched ON, the
brightness of the instrument panel
illumination is dimmed. However,
when the light sensor detects that the
surrounding area is bright such as
when the lights are turned on in the
daytime, the instrument panel
illumination does not dim.
NOTE
x
When the power switch is switched
ON in the early evening or at dusk,
the instrument panel illumination is
dimmed for several seconds until the
light sensor detects the brightness of
the surrounding area, however, the
dimming may cancel after the
brightness is detected.
x
When the lights are turned on, the
lights-on indicator light in the
instrument cluster turns on.
Refer to Headlights on page 4-38.
The brightness of the instrument panel
and instrument panel illuminations can
be adjusted by pressing the instrument
panel illumination switch while the
instrument panel illumination is
dimmed.
x
The brightness increases by pressing
the + switch.
x
The brightness decreases by pressing
the - switch. If you press the - switch
while the instrument cluster is at
maximum dimness, a sound is
activated to notify you that the
current dimmer setting is at
maximum dimness.
1. Bright
2. Dim
Function for cancelling illumination
dimmer
The illumination dimmer can be
cancelled by pressing the + switch
while the instrument cluster is at
maximum dimness and while the
power switch is switched ON. If you
press the + switch again while the
illumination dimmer is cancelled, a
sound is activated to notify you that it
is cancelled. If the instrument cluster's
visibility is reduced due to glare from
surrounding brightness, cancel the
illumination dimmer.
NOTE
x
When the illumination dimmer is
cancelled, the instrument cluster
cannot be dimmed even if the lights
are turned on.
x
When the illumination dimmer is
cancelled, the screen in the centre
display switches to constant display
of the daytime screen.
When Driving
Instrument Cluster and Display
4-16
To Next Page
Loading...
