▼
Outside Temperature Display
When the power switch is switched
ON, the outside temperature is
displayed.
NOTE
x
Under the following conditions, the
outside temperature display may
dier from the actual outside
temperature depending on the
surroundings and vehicle conditions:
x
Significantly cold or hot
temperatures.
x
Sudden changes in outside
temperature.
x
The vehicle is parked.
x
The vehicle is driven at low speeds.
Changing the Temperature Unit of the
Outside Temperature Display
The outside temperature unit can be
switched between Celsius and
Fahrenheit.
Settings can be changed by operating
the centre display screen.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
Outside Temperature Warning
*
When the outside temperature is low,
the indication flashes and a beep
sound is heard to warn the driver of
the possibility of icy roads.
If the outside temperature is lower
than about 4 °C (39 °F), the outside
temperature display and the
mark
flashes
for about 3 seconds and a beep
sound is heard once.
NOTE
If the outside temperature is lower
than -20 °C (-4 °F), the beep sound
does not operate. However, the
mark illuminates.
▼
Remaining High Voltage Battery
Power Indication
The remaining amount of power in the
high voltage battery is indicated by a
percentage.
When Driving
Instrument Cluster and Display
*Some models.
4-17
To Next Page
Loading...
