Mazda MX-30 2020 - Page 185

▼
Distance-to-full Discharge
The remaining distance to full
discharge is calculated and displayed
based on the current, remaining charge
of the high voltage battery and the
energy eciency.
NOTE
x
The indicated remaining
distance-to-full discharge is an
estimate. The remaining
distance-to-full discharge diers
depending on conditions such as the
driving conditions, surrounding
environment, and the
air-conditioning system use. Also, if
the needle in the remaining charge
level gauge for the high voltage
battery is near 0 or a message is
displayed on the multi-information
display, charge the battery as soon as
possible even if the numerical value
for the remaining distance-to-full
discharge is of a sucient level.
x
If there is no past energy eciency
information, such as after first
purchasing your vehicle or the
information was deleted when
disconnecting the lead-acid battery
terminal, the actual remaining
distance to full discharge range may
dier from the charge level
indicated.
▼
Average Energy Eciency
The average energy eciency is
calculated every 30 seconds from the
total travelled distance and the total
electrical power consumption since
the vehicle was purchased or the past
data was reset, and the rate is
displayed.
The average energy eciency is also
indicated by a red arrow on the
instantaneous energy eciency gauge.
To reset the displayed average energy
eciency data, press the INFO switch
for 1.5 seconds or longer. After
resetting the data, - - - kWh/100 km
(- - - mile/kWh) is displayed before
the average energy eciency is
recalculated and displayed.
When Driving
Instrument Cluster and Display
4-18