EasyManua.ls Logo

Mazda MX-30 2020 - Page 254

Mazda MX-30 2020
618 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Glare-Free High Beam
This feature dims only the high-beam
light shone on the vehicle ahead.
The high beams will dim while driving
at a speed of about 40 km/h (25 mph)
or faster. When the vehicle speed is
less than about 30 km/h (19 mph),
the beams switch to the low beams.
NOTE
The headlight high-beam indicator
light turns on while the high beams are
on.
Wide-Range Low Beam
This feature extends the illumination
range of the light cast by the low
beams while driving at a speed less
than about 40 km/h (25 mph).
Highway Mode
This feature shifts the illumination
angle of the light cast by the headlights
upward while driving on highways.
To Operate the System
The ALH operates to control Glare-Free
High Beam, Wide-Range Low Beam
and Highway Mode automatically after
the power switch is switched ON and
the headlight switch is in the
and low beam position.
The ALH determines that it is dark
based on the brightness of the
surrounding area. At the same time,
the ALH indicator light (green) in the
instrument cluster illuminates.
NOTE
Operation of the ALH function can be
disabled.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
Manual Switching
Switching to low beams
Switch the headlight switch to the
position, or press the ALH switch.
The ALH indicator light (green) turns
o.
1. ALH switch
If the ALH is turned o using the ALH
switch, press the ALH switch again to
turn the ALH back on.
When Driving
i-ACTIVSENSE
4-87

Related product manuals