EasyManua.ls Logo

Mazda MX-30 2020 - Page 291

Mazda MX-30 2020
618 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WARNING
Do not rely completely on the CTS
and always drive carefully:
¾The CTS is not an automated driving
system. Therefore, the function has
limitations. Do not rely completely
on the system and always stay on
course using the steering wheel.
¾Set a vehicle speed within the speed
limit according to the road
conditions and the weather
conditions.
¾The CTS may not be able to detect a
vehicle ahead depending on the type
of vehicle ahead and its conditions,
the weather conditions, and the road
conditions. Additionally, the system
might be unable to decelerate
suciently if the vehicle ahead
applies the brakes suddenly or
another vehicle cuts into your lane,
which could result in an accident.
Do not use the system under the
following conditions. Otherwise, it
may result in an accident:
¾The vehicle is driven on roads other
than expressways and highways.
¾The vehicle is driven on roads with
sharp curves or with heavy trac
where sucient distances between
vehicles cannot be kept.
¾The vehicle is driven on roads where
acceleration and deceleration are
frequently repeated.
¾The vehicle is exiting the main lane
on an expressway to enter an
interchange, a rest area, or a parking
area.
¾The vehicle is driven on slippery
roads such as icy roads,
snow-covered roads, and unpaved
roads.
¾The vehicle is driven on a long
downslope.
¾The vehicle is driven on a steep
slope.
¾A two-wheeled vehicle such as a
motorcycle or bicycle is travelling
ahead.
¾The vehicle is being towed.
¾Proximity warnings activate
frequently.
¾Under bad weather conditions (rain,
fog, and snow).
¾Tyres other than the
specified
size are
used, such as when tyre chains or
temporary spare tyres are used.
Switch the CTS
o
when it is not
being used.
Leaving the CTS on when it is not in
use is dangerous as it could operate
unexpectedly, resulting in an accident.
Do not get out of the vehicle while
the stop hold control is operating.
Getting out of the vehicle while the
stop hold control is operating is
dangerous as the vehicle may move
unexpectedly and result in an accident.
Before leaving the vehicle, switch the
CTS o, shift the selector lever to the P
position, and apply the parking brake.
NOTE
x
The CTS does not operate with the
following objects.
x
On-coming vehicles
x
Pedestrians
x
Stationary objects (such as
stopped vehicles, obstructions)
x
If a vehicle ahead is travelling at an
extremely low speed, the system may
not detect it correctly.
x
A brake operation sound may be
heard by the CTS control, however, it
does not indicate a problem.
When Driving
i-ACTIVSENSE
4-124

Related product manuals