EasyManua.ls Logo

Mazda MX-30 2020 - Page 303

Mazda MX-30 2020
618 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
When the steering wheel operation
assist operates, a warning sound and
warning indications on displays alert
the driver of the possibility of a
collision. Furthermore, if the possibility
of a collision increases, a warning
sound and display indications alert the
driver of the danger.
WARNING
Do not rely completely on the Blind
Spot Assist function and always drive
carefully:
¾The Blind Spot Assist function has
limitations. Do not rely completely
on the system and always stay on
course using the steering wheel.
¾The Blind Spot Assist function is not
an autonomous driving system. In
addition, the system is not designed
to compensate for a driver’s lack of
caution, and over-reliance on the
system could lead to an accident.
¾The detection area of the camera
and sensors is limited. If the steering
wheel operation assist is operated
without detecting a two-wheeled
vehicle near the detecting vehicle, it
could result in an accident.
Do not use the system under the
following conditions. Otherwise, it
may result in an accident:
¾The vehicle is driven on slippery
roads such as icy roads,
snow-covered roads, and unpaved
roads.
¾Tyres other than the specified size are
used, such as when tyre chains or
temporary spare tyres are used.
¾The vehicle is towing a camping
trailer or boat trailer.
¾The vehicle is driven on roads other
than expressways and highways.
¾The rear bumper around a rear side
radar sensor is deformed.
Operation conditions
The Blind Spot Assist function becomes
operational when all of the following
conditions are met.
x
The vehicle speed is about 60 km/h
(38 mph) or faster.
x
The vehicle is driven on a straight
road or gentle curve.
When Driving
i-ACTIVSENSE
4-136

Related product manuals