Mazda MX-30 2020 - Page 314

CAUTION
In the following cases, turn the SBS o
to prevent a mis-operation.
¾The vehicle is being towed.
¾The vehicle is driven on rough roads
such as in areas where there is grass
and foliage or
o-road.
Refer to Stopping the Smart Brake
Support (SBS) System Operation on
page 4-156.
Forward detection function
The forward detection function is
designed to reduce damage in the
event of a collision with target objects
at the front.
The forward detection function detects
target objects (vehicles ahead,
pedestrians, and bicycles) using the
front radar sensor and the Forward
Sensing Camera (FSC). If there is a
possibility of your vehicle colliding with
a target object at the front, you are
notified of possible danger by a
warning sound and a warning
indication on the display.
Furthermore, if the possibility of a
collision increases, the brake control is
performed to reduce damage in the
event of a collision. In addition, when
the driver depresses the brake pedal,
the brakes are applied firmly and
quickly to assist.
(Vehicles with Driver Monitoring
(DM))
If the system determines that the driver
is not paying attention to the road, it
activates the collision warning earlier
than normal.
Operation conditions
The forward detection function
operates when all of the following
conditions are met.
x
The power switch is switched ON.
x
The SBS is on.
x
(Object is vehicle ahead)
The vehicle speed is about 4 km/h
(3 mph) or higher.
x
(Object is a pedestrian or bicycle)
The vehicle speed is between about
10 and 80 km/h (6.3 to 49 mph).
x
The DSC does not operate.
NOTE
x
When any of the following
conditions is met, the forward
detection function may not operate.
x
If there is the possibility of hitting
only a part of a vehicle or
obstruction ahead.
x
You are driving your vehicle at the
same speed as the vehicle ahead.
x
When the driver deliberately
performs driving operations
(accelerator operation, steering
wheel operation).
x
The accelerator pedal is depressed
abruptly.
x
The brake pedal is depressed.
x
The steering wheel is being
operated.
x
The selector lever is being shifted.
x
The direction indicator lever is
being operated.
x
Warnings and messages, such as a
dirty windscreen, related to the
Forward Sensing Camera (FSC) or
front radar sensor are being
displayed on the multi-information
display.
x
When any of the following
conditions is met, the forward
detection function may operate.
x
There is an object in the road at
the entrance to a curve (including
guardrails and snow banks).
x
Passing an approaching vehicle
while rounding a curve.
When Driving
i-ACTIVSENSE
4-147