Mazda MX-30 2020 - Page 316

Turn-Across Trac
The Turn-Across
Trac
function is
designed to reduce damage in the
event of a collision with a vehicle
approaching in the opposite direction
making a right turn at an intersection
(right-hand drive) or making a left turn
at an intersection (left-hand drive).
The Turn-Across
Trac
function detects
a vehicle approaching in the opposite
direction using the front radar sensor
and the Forward Sensing Camera
(FSC). And, if there is a possibility of
your vehicle colliding with a vehicle
approaching in the opposite direction
when you make a right turn at an
intersection (right-hand drive) or you
make a left turn at an intersection
(left-hand drive), you are
notified
of
possible danger by a warning sound
and warning indication on the display.
Furthermore, if the possibility of a
collision increases, brake control is
performed to reduce damage in the
event of a collision.
Operation conditions
The Turn-Across Trac function
operates when all of the following
conditions are met.
x
The power switch is switched ON.
x
The SBS is on.
x
The vehicle speed is about 4 to 20
km/h (3 to 12 mph).
x
(Left-hand drive)
The left direction indicator light is
turned on and the vehicle is turning
left.
x
(Right-hand drive)
The right direction indicator light is
turned on and the vehicle is turning
right.
x
The centre line between your vehicle
and the vehicle approaching in the
opposite direction is recognised.
NOTE
x
When any of the following
conditions is met, the Turn-Across
Trac function may not operate.
x
The accelerator pedal is depressed
deliberately.
x
The brake pedal is depressed.
x
The steering wheel is in the
straight-ahead position.
x
Warnings and messages, such as a
dirty windscreen, related to the
Forward Sensing Camera (FSC) or
front radar sensor are being
displayed on the multi-information
display.
x
The vehicle approaching in the
opposite direction is a
two-wheeled vehicle or a bicycle.
x
All of or only a part of a vehicle
approaching in the opposite
direction is hidden and it cannot
be recognised.
x
The speed of the on-coming
vehicle is too slow or too fast.
x
Turning at a large intersection with
two lanes or more on one side.
x
The system may not operate
depending on the country where the
vehicle is driven.
x
When any of the following
conditions is met, the Turn-Across
Trac
function may operate.
When Driving
i-ACTIVSENSE
4-149