Mazda MX-30 2020 - Page 443

Pull over to a safe location, then
switch the power switch o and make
sure the fan is not running before
attempting to work near the cooling
fan:
Working near the cooling fan when it is
running is dangerous. The fan could
continue running indefinitely even if
the EV system has stopped and the
motor compartment temperature is
high. You could be hit by the fan and
seriously injured.
Do not leave items in the motor
compartment:
After you have finished checking or
doing servicing in the motor
compartment, do not forget and leave
items such as tools or rags in the motor
compartment.
Tools or other items left in the motor
compartment could cause EV system
damage or a fire leading to an
unexpected accident.
CAUTION
When using a chassis roller, turn the
following systems o to prevent them
from mis-operating while the vehicle is
running on the chassis roller.
¾Mazda Radar Cruise Control with
Stop & Go function (MRCC with
Stop & Go function)
¾Cruising & Trac Support (CTS)
¾Smart Brake Support (SBS)
Bonnet
▼
Bonnet
WARNING
Always check that the bonnet is
closed and securely locked:
A bonnet that is not closed and
securely locked is dangerous as it could
fly
open while the vehicle is moving
and block the driver's vision which
could result in a serious accident.
▼
Opening the Bonnet
1. With the vehicle parked, pull the
release handle to unlock the
bonnet.
2. Insert your hand into the bonnet
opening, slide the latch lever in the
direction of the allow as shown in
the illustration, and lift up the
bonnet.
Maintenance and Care
Owner Maintenance
6-10