3. Grasp the support rod in the
padded area and secure it in the
support rod hole indicated by the
arrow to hold the bonnet open.
1. Pad
2. Support rod
▼
Closing the Bonnet
1. Check under the bonnet area to
make certain all
filler
caps are in
place and all loose items (e.g.
tools, oil containers, etc.) have
been removed.
2. Lift the bonnet, grasp the padded
area on the support rod, and secure
the support rod in the clip. Verify
that the support rod is secured in
the clip before closing the bonnet.
1. Clip
3. Lower the bonnet slowly to a height
of about 20 cm (7.9 in) above its
closed position and then let it drop.
CAUTION
When closing the bonnet, do not push
it excessively such as by applying your
weight. Otherwise, the bonnet could
be deformed.
Maintenance and Care
Owner Maintenance
6-11
To Next Page
Loading...
