Before fastening the rear seat belt,
make sure that the seat belt passes
through the seat belt guide correctly
and it is not twisted.
▼
Unfastening the Seat Belt
Depress the button on the seat belt
buckle. If the belt does not fully retract,
pull it out and check for kinks or twists.
Then make sure it remains untwisted as
it retracts.
1. Button
NOTE
If a belt does not fully retract, inspect it
for kinks and twists. If it is still not
retracting properly, have it inspected at
an expert repairer (we recommend an
Authorised Mazda Repairer).
▼
Front Shoulder Belt Adjuster
The front seat belts have a front
shoulder belt adjuster. If the seat belt
contacts your neck or it slips o the
shoulder, adjust the seat belt height.
To raise
To heighten the seat belt, slide the
front shoulder belt adjuster upward.
To lower
To lower the seat belt, slide the front
shoulder belt adjuster downward with
the adjuster lever pulled.
After adjusting, press the front
shoulder belt adjuster downward and
make sure that it is securely locked.
Essential Safety Equipment
Seat Belt Systems
2-29
To Next Page
Loading...
