5. Connect the charge plug to the
outlet.
6. Connect the charge connector to
the normal charge port. Charging
starts after connection is
completed.
Make sure to lock all the doors
before leaving the vehicle while
charging.
NOTE
When the charging timer is set,
charging does not start even if the
charge connector is connected.
When you prefer to start charging
immediately, use the charging
timer cancellation function.
1. Normal charge port
7. When charging is finished, remove
the charge connector.
8. Close the normal charge port cap.
9. Close the charge lid.
10.Remove the charge plug from the
power supply.
Make sure to lock all the doors before
leaving the vehicle.
How to perform quick charging
1. Shift the selector lever to the P
position.
2. Switch the power switch OFF.
3. Press the location shown in the
figure to open the charge lid.
4. Open the quick charge port cap
and normal charge port cap.
1. Quick charge port cap
2. Normal charge port cap
5. Connect the charge connector of
the quick charger to the quick
charge port.
1. Quick charge port
6. Operate the quick charger to start
charging.
Before Driving
Electric Vehicles
3-16
MX30_8JD4-EA21G_Edition4_new 2021-8-5 15:25:29
To Next Page
Loading...
