Mazda MX-30 2022 - Some Models; Lane Departure Warning System (LDWS)

▼
Manual Switching
Switching to low beams
Switch the headlight switch to the
position, or press the high beam
control switch.
The HBC indicator light (green) turns
o.
1. High beam control switch
If the HBC is turned o using the high
beam control switch, press the high
beam control switch again to turn the
HBC back on.
Switching to high beams
Shift the lever to the high beam
position.
The HBC indicator light (green) turns
o and the headlight high-beam
indicator light is illuminated.
Lane Departure Warning
System (LDWS)
*
▼
Lane Departure Warning System
(LDWS)
The LDWS notifies the driver that the
vehicle might be deviating from its
lane.
The LDWS detects white (yellow) lines
using the Forward Sensing Camera
(FSC). If your vehicle may be deviating
from its lane, the lane departure
warning notifies the driver.
Use the LDWS when you drive the
vehicle on roads with white (yellow)
lines.
WARNING
Do not rely completely on the LDWS
and always drive carefully:
The LDWS is not designed to
compensate for a driver’s lack of
caution and relying too much on the
system could lead to an accident.
The functions of the LDWS have
limitations. Always stay on course
using the steering wheel.
When Driving
i-ACTIVSENSE
4-84
*Some models.
MX30_8JD4-EA21G_Edition4_new 2021-8-5 15:25:29