Mazda MX-30 2022 - Page 175

1. Shift position indication
When the power switch is switched
ON, the shift position is displayed in
the instrument cluster.
In the following cases, the shift
position is displayed in the instrument
cluster even if the power switch is in a
position other than ON.

The AUTO P (parking lock) function
is operating.

Neutral hold mode (automatic car
wash mode) is operating.
Shift guide indication
When the shift position and the
selector lever set position
dier,
the
shift position and the selector lever set
position are displayed.
1. Shift guide indication
2. Selector lever set position
3. Shift position
The shift guide indication is displayed
under the following conditions.

The selector lever is shifted to the P
position while driving (vehicle speed
of about 5 km/h (4 mph) or faster)
with the selector lever in the D
position.

The selector lever is shifted to the R
position while driving forward
(vehicle speed of about 10 km/h
(6.3 mph) or faster) with the selector
lever in the D position.

The selector lever is shifted to the D
position while driving in reverse
(vehicle speed of about 10 km/h
(6.3 mph) or faster) with the selector
lever in the R position.

The AUTO P (parking lock) function
is operating.

While neutral hold mode (automatic
car wash mode) is operating, the
selector lever is shifted from the N
position to the D or R position.
NOTE

In the following cases, the shift
position and the selector lever set
position dier, however, the shift
guide indication is not displayed.

The selector lever is shifted from
the N position to the D or R
position with the brake pedal not
depressed.

When the power switch is switched
ON or from ACC to OFF, the shift
guide indication displayed after
operating the AUTO P (parking lock)
function turns on for about 40
seconds and then it turns
o.
When Driving
Selector Lever Position Functions
4-27
MX30_8JD4-EA21G_Edition4_new 2021-8-5 15:25:29