Mazda MX-30 2022 - Page 234


The brake pedal is operated.
The function is temporarily stopped.
The LDWS stops functioning in the
following cases:

The temperature in the Forward
Sensing Camera (FSC) is too high or
too low.

The windshield around the Forward
Sensing Camera (FSC) is foggy.

The windshield around the Forward
Sensing Camera (FSC) is blocked by
an obstruction, causing poor forward
visibility.

Strong light (such as sunlight, or
headlights (high-beam) of
on-coming vehicles) is directed at
the Forward Sensing Camera (FSC).
System malfunction
If there is a problem with the system,
the i-ACTIVSENSE status symbol
(warning/risk avoidance support
system) (white) and the i-ACTIVSENSE
warning indication/warning light on
the multi-information display turns on
and a message is indicated.
Refer to i-ACTIVSENSE Status Symbol
(Warning/Risk Avoidance Support
System) on page 4-69.
▼
Lane Departure Warning
If the system determines that the
vehicle may deviate from its lane, a
warning (beep sound, steering wheel
vibration) is activated and the direction
in which the system determines that
the vehicle may deviate is indicated on
the multi-information display and the
active driving display.
Multi-information display
Active driving display
NOTE

The LDWS settings can be changed.
Refer to the Settings section in the
Mazda Connect Owner's Manual.

You may not be able to hear the
LDWS warning sound depending on
the surrounding conditions such as
outside noise.

If you set the LDWS to vibrate the
steering wheel, you may not feel the
vibrations depending on the road
surface conditions.
▼
Canceling the System
The LDWS can be set to inoperable.

(If only the LDWS is turned o)
Refer to the Settings section in the
Mazda Connect Owner's Manual.

(If the LDWS is turned o by
operating the i-ACTIVSENSE OFF
switch)
Refer to i-ACTIVSENSE OFF Switch
on page 4-70.
When Driving
i-ACTIVSENSE
4-86
MX30_8JD4-EA21G_Edition4_new 2021-8-5 15:25:29