Mazda MX-30 2022 - Page 428

If a fuse is blown, it must be replaced.
Follow these steps:
1. Make sure the power switch is
switched o, and other switches
are o.
2. Remove the fuse block cover.
3. If any fuse but the MAIN fuse is
blown, replace it with a new one of
the same amperage rating.
1. Normal
2. Blown
WARNING
Do not replace the main fuse by
yourself. Have an Authorized
Mazda Dealer perform the
replacement:
Replacing the fuse by yourself is
dangerous because the MAIN fuse
is a high current fuse. Incorrect
replacement could cause an
electrical shock or a short circuit
resulting in a fire.
4. Reinstall the cover and make sure
that it is securely installed.
Maintenance and Care
Owner Maintenance
6-28
MX30_8JD4-EA21G_Edition4_new 2021-8-5 15:25:29