Black plate (78,1)
Setting Change (Function Customization)
The following function settings are possible. Settings can be changed for each registered
advanced key. These settings can only be changed by an Authorized Mazda Dealer.
Setting Function
At Initial
Setting
After Setting
Change
Advanced key battery dead
indicator
KEY indicator light (green) flashes to indicate
that the advanced key battery power is low.
Activated Deactivated
Lock/unlock operation
confirmation beep sound
*1
A beep sound is heard to confirm that both doors
or the trunk lid have been locked/unlocked.
Activated Deactivated
Autolock function
When both doors are closed and the advanced key
is being carried and out of operational range, both
doors automatically lock after 3 seconds.
(Even if the driver is in the operational range,
both doors are locked automatically after about 30
seconds.)
Deactivated Activated
*1 : When the autolock function is operating, the warning sound will be heard regardless of the setting.
3-20
Knowing Your Mazda
Advanced Keyless Entry and Start System
MX-5_8U35-EA-05F_Edition2 Page78
Tuesday, June 14 2005 2:31 PM
Form No.8U35-EA-05F
To Next Page
Loading...
