Black plate (97,1)
2. Slide the hood latch to the right and lift
the hood.
3. Grasp the suppor t rod in the padded
area and secure it in the stay hole
indicated by the arrow to hold the hood
open.
Clip
Support rod
qClosing the Hood
1. Check under the hood area to make
certain all filler caps are in place and
all loose items (e.g. tools, oil
containers, etc.) have been removed.
2. Insert the support rod in its clip while
holding up the hood. Verify that the
support rod is secured in the clip before
closing the hood.
3. Close the hood so that it locks securely.
Knowing Your Mazda
Doors and Locks
3-39
MX-5_8U35-EA-05F_Edition2 Page97
Tuesday, June 14 2005 2:31 PM
Form No.8U35-EA-05F
To Next Page
Loading...
