Item Feature
Factory Set‐
ting
Available Settings
Settings
Change
Method
System
Language Language indicated in display English
Depends on market
*8
A―
Temperature
Temperature unit indicated in
display
°F °F/°C A F
Distance
Distance unit indicated in dis‐
play
mi/km mi/km A ―
Fuel Economy Monitor (page 4-69).
Ending display On/off Off On/Off B ―
Fuel economy resetting
procedure
*
Linkage/non-linkage with fuel
economy reset and trip meter A
reset
Off On/Off B ―
*
1 Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda
recommends that these systems remain On.
*
2 Only the volume of the warning beep during Blind Spot Monitoring (BSM) operation can be changed. The
volume of the warning beep during Rear Cross Traffic Alert (RCTA) operation cannot be changed.
*
3 This system functions only when the navigation system is functioning.
*
4 If the auto-wiper control is set to Off, the wiper lever position is set to intermittent operation.
*
5 If the setting is changed to Off, the following operation is performed according to the headlight switch
position:
At position: Headlights turn off immediately after the ignition is switched off.
At any position other than : Headlights on/off conditions vary according to the headlight switch
position. Refer to Headlights on page
4-45
*
6 When set to Off, the lights-on reminder is operable.
*
7 The setting of the lights-on reminder can be changed with the time setting of auto headlight off function set to
Off.
Refer to Lights-On Reminder on page 7-48.
*
8 Available only in display from the center display.
Specifications
Personalization Features
9-12
*Some models.
MX-5_8JA4-EA-19K_Edition1_old 2019-8-29 16:18:06
To Next Page
Loading...
