2
–
26
Essential Safety Equipment
Child Restraint
Child-Restraint System Suitability for Various Seat
Positions Table
(Europe and countries conforming to the UNECE 16 regulation)
Provided information in the table shows your child-restraint system suitability for various
seating position. For installation suitability of other manufacturer child-restraint system,
carefully consult the manufacturer's instructions which accompany the child-restraint
system.
ISOFIX anchor-secured child-restraint systems
When installing a child-restraint system to the passenger seat, refer to the child-restraint
system manufacturer's instructions and the Using ISOFIX Anchor on page 2-30 .
Mass group Size Class Fixture
Seat Positions
Vehicle ISOFIX positions
Passenger seat
Carrycot
F ISO/L1 X
G ISO/L2 X
(1) X
GROUP 0 Up to 10 kg (less than 22 lb)
E ISO/R1 X
(1) X
GROUP 0
Up to 13 kg (less than 29 lb)
E ISO/R1 X
D ISO/R2 X
C ISO/R3 X
(1) X
GROUP 1 9 kg ʊ 18 kg (20 lb ʊ 40 lb)
D ISO/R2 X
C ISO/R3 X
B ISO/F2 IUF
B1 ISO/F2X IUF
A ISO/F3 X
(1) X
GROUP 2 15 kg — 25 kg (33 lb — 55 lb) (1) IL
*1
GROUP 3 22 kg — 36 kg (48 lb — 79 lb) (1) IL
*1
(1) For the CRS which do not carry the ISO/XX size class identifi cation (A to G), for the applicable mass group,
the car manufacturer shall indicate the vehicle specifi c ISOFIX child-restraint system(s) recommended for each
position.
Key of letters to be inserted in the above table:
IUF = Suitable for ISOFIX forward child-restraints systems of universal category approved for use in this mass
group.
IL = Suitable for particular ISOFIX child-restraint systems (CRS) given in the attached list.
These ISOFIX CRS are those of the “specifi c vehicle”, “restricted” or “semi-universal” categories.
*1 BRITAX RÖMER KIDFIX can be installed.
To Next Page
Loading...
