Mazda RX8 - Page 250

• If the continuity is as indicated in the table, replace the front tweeter.
2. Connect a 1.5 V battery to the front tweeter and verify that noise is sound from the front tweeter.
• If no sound is output, replace the front tweeter.
BOSE
1. Verify that sound is output from the front door speaker.
• If sound is output, go to the next step.
• If no sound is not output, inspect the front door speaker and the related wiring harnesses.
2. Remove the following parts:
a. Remove the rear seat.(See REAR SEAT REMOVAL/INSTALLATION .)
b. Remove the console.(See CONSOLE REMOVAL/INSTALLATION .)
c. Remove the tire house trim.(See TIRE HOUSE TRIM REMOVAL/INSTALLATION .)
d. Remove the rear pillar trim.(See REAR PILLAR TRIM REMOVAL/INSTALLATION .)
e. Remove the rear package center trim and the rear package side trim.(See REAR PACKAGE
TRIM REMOVAL/INSTALLATION .)
f. Remove the main amplifier.(See AUDIO AMPLIFIER REMOVAL/INSTALLATION .)
3. Verify that the continuity between the front tweeter and the main amplifier is as indicated in the table.
• If the continuity is not as indicated in the table, repair or replace the related wiring harnesses.
• If the continuity is as indicated in the table, replace the front tweeter.
(w) RX-8 Body
Page 250