CENTER SPEAKER REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the following parts:
a. Lower panel(See LOWER PANEL REMOVAL/INSTALLATION .)
b. Console(See CONSOLE REMOVAL/INSTALLATION .)
c. Center panel module(See CENTER PANEL MODULE REMOVAL/INSTALLATION .)
d. Center ventilator grille(See VENTILATOR GRILLE REMOVAL/INSTALLATION .)
e. LCD unit(See LCD UNIT REMOVAL/INSTALLATION .)
3. Remove in the order indicated in the table.
1 Screw
2 Center speaker
3 Connector
4. Install in the reverse order of removal.
CENTER SPEAKER INSPECTION
1. Verify the resistance between center speaker terminals.
• If the resistance is not within the specification, replace the center speaker.
Resistance
To Next Page
Loading...
