To Next PageTo Next PageWhat to do if Mazzer super jolly Grinder fails to start?
If your Mazzer Grinder fails to start, consider these possibilities: First, check if a safety device has tripped. Reset the safety device. If it trips again, stop using the appliance and contact a skilled technician. Second, ensure the grinder is properly plugged into the mains. Unplug it and plug it back in securely.
What to do if Mazzer super jolly Grinder vibrates abnormally?
If your Mazzer Grinder is vibrating abnormally, there are several potential causes: * The grinder might not be secured correctly: Check its attachment and tighten the securing screws if needed. * The arm-motor unit might not be secured correctly to the base unit: Tighten the related blocking handle. * The vise assembly might not be secured correctly to the base unit: Tighten the related blocking handle. * The grinding wheel might not be fitted correctly in its seat on the hub: Dismantle the grinding wheel, check its integrity, and refit it correctly.
Why chain fails to block when motor arm is lowered in Mazzer super jolly Grinder?
If the chain fails to block when the motor arm is lowered on your Mazzer Grinder, it could be due to the following reasons: * The chain gauge setting knob is not positioned correctly: Check the gauge of the drive link and position the setting knob correctly. * Insufficient oil in the hydraulic circuit: Top-up with oil following the instructions given in the “Routine maintenance” section.
What to do if lamp fails to switch on in Mazzer Grinder?
If the lamp fails to switch on in your Mazzer Grinder, it might be due to these reasons: * The lamp is not screwed properly into its seat: Screw the lamp in place properly. * The lamp has blown: Replace the lamp.
How to fix oil leaks from hydraulic circuit in Mazzer super jolly Grinder?
If oil is leaking from the hydraulic circuit in your Mazzer Grinder, check the hydraulic hose connection screws and tighten them.
Essential safety precautions for operating the electrical appliance to minimize risks.
Explanation of symbols indicating potential hazards and required protective equipment.
Lists cases where the manufacturer disclaims liability for damages due to improper use or maintenance.
Covers warranty validity, void conditions, and exclusions for the product.
Definition of a skilled technician for appliance maintenance and repair.
Description of shield guards and their importance for operator safety.
Explanation of the safety switch mechanism and its function during power failures.
Instructions for securely mounting the appliance onto a workbench.
Instructions for securely mounting the appliance onto a wall.
Procedure for correctly attaching and securing the operating handle.
Methods for measuring chain gauge depth, pitch, and cutter length.
Procedure for replacing the chain stop kit specifically for 3/4" chains.
Covers setting top, cutting, and down angles for various chain types.
Procedures for setting the chain blocking unit and positioning cutters for sharpening.
Procedure for safely stopping the appliance during operation.
Steps for safely shutting down and storing the appliance after use.
Instructions for routine maintenance tasks to ensure proper operation.
General| Burr Type | Flat |
|---|---|
| Burr Size | 64 mm |
| Hopper Capacity | 1.2 kg |
| Grind Adjustment | Stepless |
| Motor Power | 350 W |
| RPM | 1400 RPM (50 Hz) / 1600 RPM (60 Hz) |
| Weight | 14 kg |
| Frequency | 50/60 Hz |
| Voltage | 220-240 V |
