SHARPENING YOUR LAWN MOWER BLADE
REMINDER: Make sure that your blade is completely clean and dry before sharpening.
A. Attaching the Blade to the Sharpener Clamp
1. Unscrew the vise handle to open the vise wide enough to allow the blade’s width to fit.
2. Center the blade between the two sets of 2 clamps. Ideally the center hole of your blade should
be centered between the 4 clamps. The blade must be properly aligned with the vise frame.
3. Tighten the vise handle to secure the blade in place.
VISE HANDLE
To Next Page
Loading...