Adjustment Menu
To access the Adjustment menu press and hold the MODE button for
2 seconds and then press the MODE button to switch between BAS /
TRE / FAD / LOUD / EQ / AREA USA-EUR / TIME MODE / BEEP.
Equalization (EQ)
-Use the VOLUME buttons to select EQ as
FLAT, CLASSIC, POP or ROCK. Default setting is “OFF.”
Area Tuning
-This option allows you to select the appropriate frequency
spacing for your location (USA or Europe).
-Use the VOLUME buttons to switch between
USA and Europe frequencies.
Time Format
-Use the VOLUME buttons to switch between
12 hour (USA) and 24 hour (Europe) clock.
BASS Level
-Use the VOLUME buttons to adjust the Bass Level range
from -7 to +7. Default setting is “0.”
TREBLE Level
-Use the VOLUME buttons to adjust the Treble Level range
from -7 to +7. Default setting is “0.”
BALANCE Control
-Use the VOLUME buttons to adjust the Balance Level
between the left and right speakers from
L7(full left) to R7(full right).
FADER Control
-Use the VOLUME buttons to adjust the FADER between the
front and rear speakers from F7(full front) to R7(full rear).
LOUD Control
-Use the VOLUME buttons to select Loudness either
ON or OFF. Default setting is “OFF.”
BEEP Control
-Use the VOLUME buttons to select if BEEP sound is either
ON or OFF. Default setting is “ON.”
To Next Page
Loading...