MBAS Discman 2 - Removing the Base Edge Tuning Attachment; Clamping a Ski or Snowboard

34 Discman 2 / 230 V
4.8.3 Removing the base edge tuning attachment
1) When removing the base edge tuning attachment, only release the
screws (the spring clip remains on the Discman).
4.9 Clamping a ski or snowboard
Clamp the ski or snowboard to be tuned upright, firmly and safely in a ski tightener!
1
1
Ski or snowboard
Ski tightener
Minimum distance 62 mm