Operating Manual
Operating Manual Page 1-5
WARNING
Danger of injury and damage!
The system is extremely heavy and awkward, if not handled properly tipping or overturning
may occur.
► Use caution when transporting a system and ensure all parts are securely fastened prior
to relocation.
► The system must be handled carefully, and must not be exposed to shock. (Adhesive
shock watch label on packaging)
► The transport may only be performed with vehicles equipped with air suspension.
Prior to installation and operation of the system, the Operating Instructions must be read and
observed. Contact the MBRAUN Service Department with any questions.
1.8 Storage
The system can be stored safely under the following conditions:
ROOM Room temperature between +10°C and +40°C
with a relative humidity ≤80%, no condensation
Glove Box
Free of liquids or substances (e.g. process chemicals, etc.)
system Protected from dust and contamination
After moving the system from storage conditions to final site location allow sufficient time for
the system to adapt to the new environment.
1.9 Conventions Used in this Manual
Representation:
Instructions begin with the symbol ► prerequesits begin with the symbol >
!
Note!
Marking of notices or additional information!
To Next Page
Loading...
