Important Product Safety Information and Precautions
When using this appliance, basic safety precautions should always be followed including the following:
01. Read all instructions before use.
Never attempt to operate blender without fully assembled blender blade assembly and
jar. Avoid contact with any moving parts. Blender is designed to not operate if blender
blade assembly and jar are not securely in place.
Blades are sharp and should be handled carefully.
To protect against risk of electrical shock and damage to product, do not submerge
motor base or run water or any liquid directly over motor base. Clean motor base with
lightly damp cloth.
Do not disassemble motor base.
Only use blender with components provided by Modern Comfort made for use with
this model.
Blender may be used indoors or outdoors, but care must be taken to avoid exposure
of motor base to rain, water, etc.
08. Wash all food contact components before first use.
09. Blender not for use by children without adult supervision.
10. Blender not for use with hot liquids.
Do not operate blender without liquid. Do not operate blender with only dry food or flour.
Do not operate blender with blender jar empty.
12. Do not place large chunks of ice into blender, use standard size ice cubes.
13. Do not operate blender if motor base is damaged or any internal parts are exposed.
14. When charging,
do not use an extension cord. Plug charger directly into a standard
US 110/120V electrical outlet. Note charger is designed to work with voltages up to 240V.
15. Do not overcharge battery for extended period of time.
16. Blender contains lithium ion battery and is designed with overheat and overload
protections as safety features.
17. Only charge blender with the provided charger to avoid damage to battery. Do not use
charger for other products.
18. Product contains lithium batteries. Do not incinerate; dispose of per applicable
regulations if damaged.
19. Do not place blender in bag fully assembled. Place motor base in bag without blender
blade/jar assembly engaged into motor base. This is to prevent accidental operation
of blender while storing or transporting.
20. For extended storage during periods of non-use, it is required that blender be charged
every two months to maximize battery life.
21. Save these instructions.
03
To Next Page
Loading...