EasyManua.ls Logo

McCall P-10-12 User Manual

McCall P-10-12
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
McCall Refrigeration / 81 West Holly Street / Parsons, TN 38363
Phone (731) 847-5570 / Fax (731) 847-9012 / 1-888-REACH-IN (1-888-732-2446) / www.mccallrefrigeration.com
January 2007 / Printed in U.S.A.
S
ANDWICH
/S
ALAD
P
REP
T
ABLES
SPECIFICATIONS
Cabinet - Stainless steel top, front, door(s) and exterior
ends. All metal, welded construction. All joints and
seams closed and sealed. Enclosed rear with removable
machine compartment panel, Zinc coated steel exterior
bottom and rear with coved, sanitary aluminum interior
(S/S interior available if specified.). Salad and sandwich
unit model tops are provided with foamed-in-place, high
impact non-conducting thermobarrier, raised edge
breaker frame. Opening fitted with 1/6 size 4" deep
high-impact plastic salad pans. Openings will
accommodate 6" deep inserts (not provided). The unit is
supported by 6" minimum height adjustable legs with
non-marring feet.
Doors - Self-closing with full face S/S exterior and
aluminum inner pan standard, stainless steel optional.
Door insulated with one-shot, polyurethane and one
piece vinyl, self-adjusting magnetic gasket keyed into a
thermal-breaker retainer frame. Gaskets are removable
without tools for cleaning. All door openings have full
perimeter minimum-wattage anti-condensate heaters
behind the S/S facia to retard condensation. One piece
door pull with concealed self-closing hinge mechanism,
safety stops and stay open feature. Doors on the single
section models are reversible and can be quickly
rehinged without special tools (with additional
hardware). These are shipped from factory hinged on
the right, facing cabinet.
Insulation - Entire cabinet, and door insulated with
special, extra rigid one-shot, high pressure, foamed-in-
place, closed cell polyurethane, average thickness 2".
Moveable box cover lid has 1/2" insulation.
Interior Shelves - Two heavy-duty, adjustable,
removable epoxy coated shelves are furnished for each
door section.
Self-Contained Refrigeration - The system is a forced-
air, off cycle defrost, hermetic design with R-134a
refrigerant, capillary-metering device, and automatic,
adjustable thermostat. It is self-contained with air-
cooled, condensing unit and a high-efficiency, space-
saver diffuser with high-humidity, fin coil for extra long
life. All models are complete with a removable, energy
free automatic condensate evaporator. No floor drain or
plumbing connections required.
All units are performance tested on the production line
prior to shipping.
27" Wide Models: P-6
45" Wide Models: P-10-6,
P-10-8, & P-10-12
59" Wide Models: P-15-8,
P-15-12, & P-15-16
Standard Features
• “One-shot” high-pressure, foamed-in-place Polyurethane
insulation
• Automatic defrost
• Matched coil and compressor
• Energy-free automatic condensate evaporator
• No need for plumbing or floor drains
• Heavy-duty stainless steel tops, fronts, doors and
exterior ends
• 6" adjustable legs
• Full access, combination stainless steel telescoping box
cover and utility shelf
• 4" deep salad/condiment pans
• 14", full-width removable/reversible synthetic
cutting board
• Interior thermometer
P-6-8
P-10-12
Approval :
AIA #
ITEM #
MODEL #
PROJECT NAME
SIS #
CLASSIFIED TO
NSF (STD-7-1999)
McCall Refrigeration specification sheets are available
online @ www.mccallrefrigeration.com
Question and Answer IconNeed help?

Do you have a question about the McCall P-10-12 and is the answer not in the manual?

McCall P-10-12 Specifications

General IconGeneral
BrandMcCall
ModelP-10-12
CategoryRefrigerator
LanguageEnglish

Summary

Standard Features

Specifications

Cabinet Construction

Details on the stainless steel construction of the cabinet, joints, seams, and bottom.

Door Features

Self-closing doors with magnetic gaskets, anti-condensate heaters, and reversible hinge options.

Insulation Details

Description of the high-pressure, foamed-in-place polyurethane insulation used throughout the unit.

Interior Shelving

Information on the two heavy-duty, adjustable, removable epoxy-coated shelves per section.

Refrigeration System

Details on the forced-air, off-cycle defrost, R-134a refrigerant, thermostat, and evaporator.

Product Model Specifications

Single Door Sandwich Units (27" Models)

Capacity, dimensions, shelf area, compressor HP, BTUH, cabinet amps, and shipping weight for 27" models.

Two Door Sandwich Units (45" Models)

Capacity, dimensions, shelf area, compressor HP, BTUH, cabinet amps, and shipping weight for 45" models.

Two Door Sandwich Units (59" Models)

Capacity, dimensions, shelf area, compressor HP, BTUH, cabinet amps, and shipping weight for 59" models.

Bidding Specifications & Options

Bidding Specifications

Key requirements for McCall Sandwich Salad Prep Tables: stainless steel, insulation, defrost, and pan inserts.

Available Options

Optional features include stainless steel interior/exterior rear, overhead shelf, door lock, and casters.

Related product manuals