MCCORMICK X60.30 - Grease Points - Pick up Hitch; Greasing Points - Rear Tow Hooks

198
Maintenance
250 HOUR MAIN SERVICE
WARNING: Always use specific personal safety devices
for each operation. Beware of burns caused by hot
tractor parts. [4.1.n]
Grease Points - Pick up Hitch ( if
equipped)
Lockinglatchesforautohitch
Lockinglatchesandrearpivotpoints.
NOTE: Use lithium grease of the prescribed type.
NOTE: In severe conditions lubricate these points more
frequently.
1.Thehitchshouldbecarefullycleanedevery250hour
operation,andthemovingparts(alsoinnersliderails)
shouldbegreasedtoavoidcorrosion.
2.Makesurethatallmovingpartsmovefreelyandoperate
correctly.
NOTE: In heavy duty operating conditions, the hitch could
require a more frequent greasing to ensure it operates
correctly.
IMPORTANT: The hitch clevis and pin are copiously
greased before delivery from the manufacturing plant to
ensure a correct operation for a long time. In heavy duty
conditions, however, a more frequent lubrication of these
points could be required. In this case, the operation must
be performed EXCLUSIVELY by your Dealer.
Greasing points - Rear tow hooks
(according to fitted type)
Varioustypesofreartowhooksareavailabledepending
onapprovalsandregulationsvalidineachcountry.
Movingpartsshouldbecleanedandgreasedaccording
tothefittedtypeoftowhookanddrawbar.
Check torque of bolts and nuts of
the tow hook (according to the fit-
ted type)
Check the torque values of all bolts and nuts for ALL
hitchtypesbeforethedelivery,thenevery250hours.
Check torque of bolts and nuts of
the support bracket of the drawbar
(according to the fitted type)
Checkthetorqueofthedrawbarsupportbracketbolts
andnutsevery250hours.