To Next PageTo Next Page
Need help?Do you have a question about the McCulloch 441 and is the answer not in the manual?
Read instructions carefully and understand them before using the unit. Retain for future reference.
Service by qualified dealer, ensure chain stops at idle, use recommended parts.
Describes features like Reduced-Kickback Guide Bar, Low-Kickback Chain, and Handguard.
Use two hands, operate in ventilated area, avoid ladders, ensure chain doesn't move at idle.
Do not smoke, eliminate sparks, mix/pour in outdoor area, store fuel properly.
Techniques for maintaining control, including grip, stance, and arm position.
Explains kickback types (rotational, pinch, pull-in) and how to avoid them.
Information about the chain brake's function, warnings, and operation.
How to check and adjust chain tension, especially for new chains.
Read fuel information, contact dealer if unsure.
Detailed steps for starting a cold engine, including primer, choke, and rope pulls.
Use correct unleaded gasoline mixed with 2-cycle oil at 40:1 ratio.
Chain must not move at idle speed. Refer to carburetor adjustment if it does.
Hold saw firmly on ground, ensure chain is free, pull starter rope.
The process of cutting a fallen tree into desired log lengths.
Warnings and precautions for felling trees, planning retreat path.
Disconnect spark plug before maintenance, except carburetor adjustments.
General
