KEY TO SYMBOLS
2 – English
Symbols
WARNING! A clearing saw,
brushcutter or trimmer can be
dangerous if used incorrectly or
carelessly, and can cause serious
or fatal injury to the operator or
others. It is extremely important
that you read and understand the
contents of this operator’s manual.
Please read the operator’s manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
• A protective helmet where there is
a risk of falling objects
• Approved hearing protection
• Approved eye protection
Max. speed of output shaft, rpm
This product is in accordance with
applicable EC directives.
Watch out for thrown objects and
ricochets.
The operator of the machine must
ensure, while working, that no
persons or animals come closer than
15 metres.
Machines "tted with saw blades or
grass blades can be thrown violently
to the side when the blade comes
into contact with a "xed object. This is
called blade thrust. The blade is
capable of amputating an arm or leg.
Always keep people and animals at least 15 metres from
the machine.
Always wear approved protective
gloves.
Wear sturdy, non-slip boots.
Choke: Set the choke control in the
choke position.
Air purge.
Noise emission to the environment
according to the European
Community’s Directive. The
machine’s emission is speci"ed in
the Technical data chapter and on the
label.
Keep all parts of your body away from
the hot surfaces.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
Switch off the engine by moving the
stop switch to the STOP position
before carrying out any checks or
maintenance.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
Approved eye protection must always
be used.
10000
5
0
FT
15
m
50FT
15 m
S1154653-38,B40 B,P ELITE_1.fm Page 2 Wednesday, March 14, 2012 7:51 AM
To Next Page
Loading...
Need help?
General