To Next PageTo Next Page
Need help?Do you have a question about the McCulloch B26PS and is the answer not in the manual?
General| Engine Displacement | 26 cm³ |
|---|---|
| Power Output | 0.75 kW |
| Cutting Width | 43 cm |
| Weight | 5.4 kg |
| Engine Type | 2-stroke |
| Shaft Type | Straight |
| Handle Type | Loop |
| Fuel Tank Volume | 0.55 liters |
Explains symbols for general hazards, personal protection, distances, and certifications.
Details symbols for machine operation controls like choke, primer, and refueling.
Illustrates symbols related to personal protective gear and maintenance.
Emphasizes the importance of reading the operator's manual before use.
Warns about long-term noise exposure and the need for hearing protection.
Warns against unauthorized modifications and use of non-original accessories.
Highlights the dangers of incorrect use and the need to understand manual contents.
Provides background on the McCulloch brand and product philosophy.
Identifies and labels all parts of the trimmer and brushcutter.
Covers user condition, modifications, area safety, and distance rules.
Details requirements for helmets, hearing, eye protection, gloves, boots, and clothing.
Explains the purpose and maintenance of the machine's safety features.
Describes the function and operation of the throttle lockout system.
Explains how to use the stop switch to turn off the engine safely.
Details the function and importance of the cutting attachment guard.
Covers muffler function, heat warnings, and spark arrestor mesh maintenance.
Explains the use of locking nuts and general safety for cutting attachments.
Details safe practices for sharpening blades and using trimmer heads.
Instructions for attaching the P-barrier to the shaft.
Steps for connecting and separating the two-piece shaft.
Guides on installing blades, guards, and trimmer heads correctly.
Specific instructions for fitting guards and trimmer heads.
Instructions for attaching the transport cover for blades.
Guidance on adjusting the harness for optimal working position.
Covers safe practices for handling fuel, including spills and leaks.
Guidelines for safely transporting and storing the machine and fuel.
Details the type of petrol and two-stroke oil required for the engine.
Step-by-step instructions for mixing petrol and oil correctly.
Outlines safe practices for refueling the machine to prevent fire.
Lists essential checks to perform before starting the machine.
Provides instructions for starting the engine when it is cold.
Explains the use of the 3-position choke for starting and running.
Details the use of the primer bulb and the steps for starting the engine.
Instructions for starting the engine when it is already warm.
Explains how to safely stop the engine using the stop switch.
Provides fundamental safety rules and advice for operating the machine.
Lists key safety practices for safe operation, environment, and personal conduct.
Offers advice on slowing the engine and avoiding damage.
Explains how to use a grass blade for clearing thick grass and the correct technique.
Details how to trim grass using the trimmer head and its limitations.
Guides on effective grass cutting and avoiding damage to the tool.
Explains how to use the trimmer for quick clearing and sweeping.
Details how to adjust the idle speed of the carburettor.
Covers muffler checks, cleaning, and heat warnings.
Identifies the components of the machine's cooling system.
Explains how to check, clean, gap, and replace the spark plug.
Advises on lubricating the splined coupling of the two-piece shaft.
Details procedures for cleaning and oiling the air filter.
Instructions on checking and topping up grease in the bevel gear.
Explains how to check and adjust the throttle cable tension.
Provides a table outlining weekly, monthly, and annual maintenance checks.
Lists engine displacement, speed, ignition, and fuel system details.
Details measured noise and vibration levels for different configurations.
Lists approved cutting attachments and optional universal accessories.
States the manufacturer's compliance with EU directives and standards.
